VENOM VEN-8181 Quick Manual - page 11
11
The Fail Safe feature is used to help prevent an out of control model caused by the
loss of a transmitter signal. If a loss of signal should occur the receiver will adjust the
steering or throttle or both to a preset value.
This function is used to calibrate the neutral center point of the of the Steering wheel
or Throttle trigger.
1) Press
ENTER to see the FUNCTION MENU.
2) Use the
+/- Keys to select the NEUTRAL function.
3) Use the
+/- Keys to select YES.
4) Press
ENTER to calibrate the neutral
5) Press
EXIT TWICE to save and return to the FUNCTION menu.
Note: Do not move the Steering wheel or Throttle trigger during the calibration
process.
2.15 FUNCTION / F/S (FAIL-SAFE)
2.16 FUNCTION / NEUTRAL
1) Press
ENTER to see the FUNCTION MENU.
2) Use the
+/- KEYS
to highlight
F/S and press
ENTER
3) Press
ENTER
to select a setting
4) Use the
+/- KEYS
to change the value
5) Press
EXIT
to save and return to
SYSTEM MENU, press
EXIT
to return to the
FUNCTION MENU, press
EXIT
again to Main Screen.
1) Press
ENTER to see the FUNCTION MENU.
2) Use the
+/- KEYS
to highlight
F/S and press
ENTER
3) Press
ENTER
to select a setting
4) Use the
+/- KEYS
to change the value
5) Press
EXIT
to save and return to the
FUNCTION MENU, press
EXIT
again to Main
Screen.
TERMS: EN-ENABLE, TH-THROTTLE, ST-STEERING,
TERMS: EN-ENABLE, TH-THROTTLE, ST-STEERING,