VENOM VEN-8181 Quick Manual - page 13
13
2.19 FUNCTION / M_RES (MODEL RESET)
Model Reset feature is used to reset a specific model memory slot back to factory
default settings.
1) Press
ENTER to see the FUNCTION MENU.
2) Use the
+/- Keys to select the M_RES function and press ENTER.
3) Use the
+/- Keys to select YES.
4) Press
ENTER twice to reset the data.
5) Press
EXIT TWICE to save and return to the FUNCTION menu.
2.20 FUNCTION / TIMER
Use the timer to monitor your race, lap times or test session. By default the Timer is
set to the
INH (Inactive) Mode. Use the
+/-
Keys to set the mode to
UP_T or DN_T to
activate the timer function. The
UP_T setting will count up from zero to a user set time
limit or a maximum of 99 minutes 30 seconds. The
DN_T setting will count down to zero
from a user set time limit or a maximum of 99 minutes 30 seconds. The timer will start
on the first pull of the Throttle Trigger and will stop when full brakes are applied.
1) Press
ENTER to see the FUNCTION MENU.
2) Use the
+/- KEYS
to highlight
TIMER and press
ENTER
3) Press
ENTER
to scroll through
INH, UP_T and DN_T.
4) Press
ENTER
to set the timer in 30sec increments
. Maximum time limit is 99 min, 30
sec.
5) Press
EXIT
to save and return to the
FUNCTION MENU, press
EXIT
again to return
to the Main Screen.