2kw downflow fan heater installation and operating instructions please read instructions in conjunction with the illustrations. Please save these instructions 220-240v ~ 50hz ip23 ref:- 404486.
Important read these instructions fully before using the heater. Retain these instructions for future reference. The heater has a loading of 2kw. It is designed for permanent wall mounting and is suitable for operation on a.C electricity supply having the same voltage as shown on the rating label. I...
Mounting the wall heater 1. The heater is secured to the wall with three screws (provided). Mark the position of the three holes on the wall (diagram a & b) make the holes 8mm diameter to a depth of 40mm in the wall. 2. Insert the three plastic wall plugs (provided) into the holes. (diagram c) screw...
Electrical connections before undertaking installation work, ensure the electricity supply is disconnected from any relevant fixed wiring. The heater is supplied with a pre-connected length of cable. This appliance should therefore be installed by a competent electrician in accordance with the iee w...