Venta Airwasher LW15 User Manual - page 7
6
BeFore First use
1 Place the unit upright on a firm, flat surface. For proper air circulation make sure the vented
sides are at least 18-20” clear of any wall. Do not block airflow inlets and outlets. Unrestricted
airflow will result in the best efficiency and performance of your Venta Airwasher.
2 Inspect the switching power supply to insure it is free of damages.
3 Make sure the upper housing is removed from the lower housing.
4 Place disk stack(s) into lower housing.
5 Add fresh tap water. Fill water to the fill line
located approximately one (1) inch below the
top on the inside of the lower housing. You can
transport the lower housing to your sink or tub
– or you may fill the lower housing by carrying
the water in a pitcher or watering can to the
lower housing. Be careful when filling, cleaning,
or moving the Venta Airwasher to avoid water
spills.
do not fill your Venta through the air
intake holes on top of the upper housing.
6 LW 15/25: Add the entire contents of one
sample bottle of Water Treatment Additive.
LW 45: Add the entire contents of both sample
bottles of Water Treatment Additive.
7 Place upper housing properly on top of lower housing.
8 Plug switching power supply into standard 110-120 V AC outlet.
9 See “Daily Use and Operation” on page 7.
UPPER HOUSInG
DISK STACK
LOWER HOUSInG