Summary of THINTRI 38 LED
Page 1
Thintri 38 led thintri 64 led owner’s manual by tm.
Page 2: Table of Contents
2 by tm thintri 38 led / thintri 64 led owner’s manual table of contents before you begin .......................................... 3 what is included ................................................. 3 unpacking instructions........................................ 3 claims ...........................
Page 3: Before You Begin
3 www.Venuelightingeffects.Com before you begin what is included • thintri 38 or thintri 64 led lights • power cord unpacking instructions carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition. Claims if the box or th...
Page 4
4 by tm thintri 38 led / thintri 64 led owner’s manual safety instructions please read the following safety notes carefully before working with the product. The notes include important safety information about installation, usage, and maintenance. • always connect the product to a grounded circuit t...
Page 5: Introduction
5 www.Venuelightingeffects.Com introduction product overview thintri 38 led thintri 64 led lenses back panel view front view display menu buttons microphone dmx in/out fuse holder power in/out safety loop 9.9ʺ (251.5 mm) 2.9ʺ (75 mm) 3.3ʺ (84 mm) lenses back panel view front view power in/out microp...
Page 6
6 by tm thintri 38 led / thintri 64 led owner’s manual lenses back panel view front view power in/out microphone dmx in/out display menu buttons fuse holder safety loop 8.78ʺ (223 mm) 3.11ʺ (79 mm) 3.3ʺ (84 mm) lenses back panel view front view display menu buttons microphone dmx in/out fuse holder ...
Page 7: Setup
7 www.Venuelightingeffects.Com setup ac power the thintri 38/64 have an auto-ranging power supply and it can work with an input voltage range of 100 to 240 vac, 50/60 hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the pr...
Page 8
8 by tm thintri 38 led / thintri 64 led owner’s manual mounting before mounting the product, read and follow the safety recommendations indicated in the safety notes. Orientation the thintri 38/64 may be mounted in any position; however, make sure adequate ventilation is provided around the product....
Page 9: Operation
9 www.Venuelightingeffects.Com operation control panel operation to access the control panel functions, use the four buttons located underneath the display. Please refer to the product overview to see the button locations on the control panel. Button function press to find an operation mode or to ba...
Page 10
10 by tm thintri 38 led / thintri 64 led owner’s manual dmx linking the thintri 38/64 works with a dmx controller. Configuration (dmx) set the product in dmx 3-ch or 8-ch mode to control with a dmx controller. 1. Connect the product to a suitable power outlet. 2. Connect a dmx cable from the dmx out...
Page 11
11 www.Venuelightingeffects.Com dmx channel assignments and values 8 channel channel function value percent/setting 1 red 000 ➜ 255 0 – 100% 2 green 000 ➜ 255 0 – 100% 3 blue 000 ➜ 255 0 – 100% 4 color macros (overrides ch. 1–3) 000 ➜ 015 no function 016 ➜ 255 color macros 5 strobe (when ch6 is 000–...
Page 12
12 by tm thintri 38 led / thintri 64 led owner’s manual configuration (standalone) set the product in one of the standalone modes to control without a dmx controller. Connect the product to a suitable power outlet. Never connect the product to a rheostat (variable resistor) or dimmer circuit, even i...
Page 13
13 www.Venuelightingeffects.Com custom color mixing to custom mix a static color, follow the instructions below: 1. Press repeatedly until u-- shows on the display. 2. Press and one of the following will show on the display: • r_ _ _ (red) • g_ _ _ _ (green) • b_ _ _ (blue) 3. Press to cycle through...
Page 14: Maintenance
14 by tm thintri 38 led / thintri 64 led owner’s manual configure all the slave products before connecting the master to the daisy chain. Never connect a dmx controller to a dmx string configured for master/slave operation because the controller may interfere with the signals from the master. Mainte...
Page 15: Technical Specifications
15 www.Venuelightingeffects.Com technical specifications thintri 38 thintri 64 dmx channels 3/8 3/8 dmx connectors 3 pin xlr 3 pin xlr light source: (tri-color rgb led) 3 w (1a), 50,000 hours life expectancy) 6 12 strobe rate 0-20 hz 0-20 hz pwm frequency 1,200 hz 1,200 hz beam angle 15 o 15 o field...
Page 16: Warranty
16 by tm thintri 38 led / thintri 64 led owner’s manual warranty one (1) year limited warranty subject to the limitations set forth below, venue by proline ™ hereby represents and warrants that the components of this product shall be free from defects in workmanship and materials, including implied ...