Venue Lighting Effects THINTRI 38 LED Owner's Manual - Maintenance
14
by
TM
THINTRI 38 LED / THINTRI 64 LED
OWNER’S MANUAL
Configure all the Slave products before connecting the Master to the daisy chain.
Never connect a DMX controller to a DMX string configured for Master/Slave operation because
the controller may interfere with the signals from the master.
MAINTENANCE
PRODUCT MAINTENANCE
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light
source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean your lighting
products at least twice a month. However, be aware that usage and environmental conditions could be contribut-
ing factors to increase the cleaning frequency. To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/
vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.