Venue Lighting Effects THINTRI 38 LED Owner's Manual - page 10
10
by
TM
THINTRI 38 LED / THINTRI 64 LED
OWNER’S MANUAL
DMX LINKING
The ThinTri 38/64 works with a DMX controller.
Configuration (DMX)
Set the product in DMX 3-CH or 8-CH mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on
the product.
DMX PERSONALITY AND STARTING ADDRESS
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode
uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s
channels. The ThinTri 64/38 uses up to 8 DMX channels in an 8-CH DMX mode, which defines the highest
configurable address to
505.
To select the starting address, do the following:
1. Press repeatedly until 3-CH or 8-CH shows on the display.
2. Press and d 1–d512 will show on the display.
3. Use or to select the starting address.
4. Press