VOKERA Mynute 28e User Instructions - page 11
11
Mynute
HELPFUL HINTS
1. The + and - buttons are used to change times. Press
and release for small changes; press and hold down
and the time will ’run’.
2. You cannot set the first switch on time (ON1) before
mid-night but you can set the (OFF2) after midnight so
long as you don’t try to exceed 23 hour 50 mins after
(ON1).
3. The four switching times have to be in sequence
(ON1,OFF1,ON2,OFF2) if you try to set OFF1 earlier
than ON1 the display will stop at the ON1 time with the
OFF symbol flashing. The same thing will happen with
other switching times e.g. between OFF1 and ON2,
this time the ON symbol will flash.
4. If you attempt to set the ON1 after the OFF1 time, the
ON symbol will flash and the OFF1 setting will follow
the ON1 time being set to prevent incorrect program-
ming. The same feature applies with the other ON and
OFF times and also between the OFF and ON times.
5. If you get confused and wish to start the whole
programming procedure again, press the SET and +
buttons together for a moment. The module will revert
to a mid-night time display and the built-in standard
programme. You will now have to set the clock again
and then enter the programme you want.
6. When you are making adjustments to timings, if no
button is pressed for 1 to 2 minutes, the module will
automatically revert to the normal operating mode.
7. To shut the CH down for the Summer simply select the
OFF option by means of the CH SELECT button.
PROGRAMMER OPTIONS
Hot water and central heating can be operated independ-
ently.
The programmer gives you 4 options for both CH & HW:
OFF - Off all the time.
TIMED - On/Off at all periods set in programme.
ONCE - On for one period each day (ON1 > OFF2).
ON - On all the time.
Obtain the options you require by using the SELECT
buttons for CH & HW to move the arrows in the display to
the appropriate position.
Press the SET button again and the question SET HW
PROG ? will be displayed.
STANDARD PROGRAM FOR 24HR 2 CHANNEL PROGRAMMER
SWITCHING
STANDARD PROG.
H/W
6.30am
8.30am
4.30pm
10.30pm
C/H
6.30am
8.30am
4.30pm
10.30pm
ON 1 - Start of first timed period of day (ON)
OFF 1 - End of first timed period (OFF)
ON 2 - Start of second timed period (ON)
OFF 2 - Final switch (OFF)