VOKERA Mynute 28e User Instructions - page 3
3
Mynute
THINGS YOU SHOULD KNOW
1.1
GAS APPLIANCE
Gas Safety (Installations and Use) Regulations.
In the interests of your safety and that of the
others it is a legal requirement that all gas
appliances are installed and correctly maintained
by a competent person and in accordance with
the latest regulations.
1.2
ELECTRICAL SUPPLY
Please ensure that this appliance has been
properly connected to the electrical supply by
means of a double pole isolator or un-switched
socket, and that the correct size of fuse (3 amp)
has been fitted.
Warning: this appliance must be earthed!
1.3
GUARANTEE REGISTRATION CARD
Please take the time to fill out your guarantee
registration card. The completed warranty card
should be posted within 30 days of installation.
1.4
APPLIANCE LOG BOOK
A log book is supplied with the boiler. This important
document must be completed during the installation/
commissioning of your boiler. Failure to install and
commission the appliance in accordance with the
manufacturers instructions may invalidate the
warranty. This does not affect your statutory rights.
1.5
HOW DOES IT WORK?
Your Mynute boiler is a central heating boiler,
which supplies heated water to your radiators
and hot water cylinder.
It is controlled by the time clock or programmer
and any thermostats that your installer may have
fitted.
The Mynute lights electronically and does not
have a pilot light. In the unlikely event of a fault
developing with your boiler, the supply of gas to
the burner will be terminated automatically.
1.6
ADDITIONAL FEATURES
Your Mynute boiler includes some of the latest
features that have been designed to ensure
continued safety and reliability of the appliance.
These include:
●
appliance frost protection
●
pump-spin
●
diagnostic fault codes
●
LED status indicator
FROST PROTECTION
Your Mynute will automatically operate to minimise
the risk of frost damage to the boiler itself. The
frost protection device will be disabled should the
power supply to the boiler be disrupted.
PUMP-SPIN
When the boiler has not been used for more than
24 hours, the pump is energised for a few seconds
1.7
DIMENSIONS
HEIGHT
WIDTH
DEPTH
820 mm
450 mm
355 mm
to ensure that it does not stick or jam. The pump-
spin device will be disabled should the power
supply to the boiler be disrupted.
DIAGNOSTIC FAULT CODES
In the unlikely event of a fault developing, the
boiler displays a unique fault code that helps
identify where the fault lies.
LED STATUS INDICATOR
The Mynute is equipped with a LED status indicator
that gives a visual indication of whether the boiler
is working normally or has developed a fault.
1.8
CLEARANCES REQUIRED
ABOVE
BELOW
SIDES
FRONT
150 mm
150 mm
12 mm
600 mm