Volvo 2006 S60 Owner's Manual - page 176
2006 Volvo S60
Attaching the jack
●
Position the jack correctly on the bar in the attachment (see illustration above) and crank while
simultaneously guiding the base of the jack to the ground. The base of the jack must be flat on a level,
firm, non-slippery surface. Before raising the car, check that the jack is still correctly positioned in the
attachment.
●
Raise the vehicle until the wheel to be changed is lifted off the ground.
●
Unscrew the wheel bolts completely and carefully remove the wheel so as not to damage the threads
on the studs.
NOTE: To avoid excessive wear and the necessity of rebalancing, mark and reinstall wheels in the same
location and position as before removal. To lessen the chance of imbalance, each wheel hub is equipped
with a guide stud to ensure that a removed wheel can be reinstalled in its original position (as when
changing over to winter tires/wheels).
Jack on certain models
file:///K|/ownersdocs/2006/2006_S60/06s60_09.htm (19 of 21)12/30/2006 4:47:18 PM