W & H Multiport 201 Instructions For Use Manual - page 2
Safety advice
Safety advice
Safety advice
Safety advice
Intended use of the product
Intended use of the product
Intended use of the product
Intended use of the product
Product description
Product description
Product description
Product description
Multiport is an optional data logger for laboratory instruments , based on a connected USB mass storage device, and/or commun
(serial ports, USB).
The 10/100-baseT Ethernet connection is available only for manufacturer’s internal purposes and is not available for the user.
Intended use of the product
Intended use of the product
Intended use of the product
Intended use of the product
Digital data saving and/or communication port expansion for laboratory instruments.
Safety recommendations
Safety recommendations
Safety recommendations
Safety recommendations
•
The product shall be installed, used and serviced in accordance with these instructions for use, otherwise the
may be impaired. The user is responsible for the proper installation, the correct use and maintenance of the product in accordance w
listed in this manual.
•
The product is intended for indoor use only.
•
The device is intended for professional use only by trained people.
•
The product must not be used in presence of explosive or flammable gases, vapours,
•
Keep away from direct sunlight and other heat or humidity sources.
•
Do not remove the name plate or any label from the product.
•
Do not pour water or any other liquids over the product.
All drawings, images and texts contained in this manual are the property of the manufacturer.
All rights reserved. Even partial duplication of drawings, images or text is prohibited.
The information contained in this document is subject to change without prior notice.
•
Do not pour water or any other liquids over the product.
•
Unplug the mains cable before inspecting, carrying out maintenance or servicing the product.
•
Repairs, maintenance and service must be carried out by service technicians authorized by the manufacturer and using genuine
•
Connect only to double insulated, limited energy circuit. Power supply must be double
•
Power supply must provide limited energy circuit, as this is an essential requirement against overheat, flame and fire.
•
In case of transport use original or appropriate packaging.
•
Disconnect power supply before cleaning: Never use disinfectants or abrasive products.
Multiport is an optional data logger for laboratory instruments , based on a connected USB mass storage device, and/or communication port expansion
baseT Ethernet connection is available only for manufacturer’s internal purposes and is not available for the user.
instruments.
The product shall be installed, used and serviced in accordance with these instructions for use, otherwise the protection provided by the equipment
impaired. The user is responsible for the proper installation, the correct use and maintenance of the product in accordance with the instructions
The product must not be used in presence of explosive or flammable gases, vapours, liquids or solids.
2
drawings, images and texts contained in this manual are the property of the manufacturer.
All rights reserved. Even partial duplication of drawings, images or text is prohibited.
The information contained in this document is subject to change without prior notice.
Unplug the mains cable before inspecting, carrying out maintenance or servicing the product.
Repairs, maintenance and service must be carried out by service technicians authorized by the manufacturer and using genuine spare parts only.
supply must be double insulated.
circuit, as this is an essential requirement against overheat, flame and fire.
Disconnect power supply before cleaning: Never use disinfectants or abrasive products.