W & H Multiport 201 Instructions For Use Manual - page 9
Technical data
Technical data
Technical data
Technical data
TECHNICAL DATA (
TECHNICAL DATA (
TECHNICAL DATA (
TECHNICAL DATA (
Electrical supply:
Electrical supply:
Electrical supply:
Electrical supply:
Nominal voltage:
Max. power:
Power supply characteristics:
12-24 Vdc
6,5 W
Power supply must be EN61010 or EN60950 compliant. Double insulated. Limited energy circuit to avoid generation of fire in
single fault condition.
CONFORMITIES
CONFORMITIES
CONFORMITIES
CONFORMITIES
single fault condition.
Product
Product
Product
Product:
Working temperature:
Working relative humidity:
Storage temperature /relative humidity:
Max altitude:
Overall dimensions:
Weight (without connections):
from +5°C to +40°C
Max. RH 80% up to 31°C, linearly decreasing to 50% at 40
-20°C to +60°C/0-90% RH
4000 m asl
W: 158 mm/H: 83 mm/D: 26 mm
0,4 kg
Degree of protection (IEC 60529)
IP30
USB
USB
USB
USB::::
available voltage:
max. current:
5Vdc
500mA
CONFORMITIES
CONFORMITIES
CONFORMITIES
CONFORMITIES
Electric / hydraulic product for indoor use, conform with the
Electric / hydraulic product for indoor use, conform with the
Electric / hydraulic product for indoor use, conform with the
Electric / hydraulic product for indoor use, conform with the following
following
following
following standards:
standards:
standards:
standards:
2002/96/CEE
Waste Electrical and Electronic Equipment (WEEE),
IEC 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory
requirements,
EN 61326
Electrical equipment for measurement, control and laboratory use: EMC requirements.
TECHNICAL DATA (
TECHNICAL DATA (
TECHNICAL DATA (
TECHNICAL DATA (Multiport
Multiport
Multiport
Multiport))))
Power supply must be EN61010 or EN60950 compliant. Double insulated. Limited energy circuit to avoid generation of fire in
PRODUCT DATA LABEL
PRODUCT DATA LABEL
PRODUCT DATA LABEL
PRODUCT DATA LABEL
C, linearly decreasing to 50% at 40°C
PRODUCT DATA LABEL
PRODUCT DATA LABEL
PRODUCT DATA LABEL
PRODUCT DATA LABEL
9
Safety requirements for electrical equipment for measurement, control and laboratory use, general
requirements.