W & H Multiport 201 Instructions For Use Manual - page 7
Front panel
Front panel
Front panel
Front panel
Lights
Lights
Lights
Lights
In the front panel some lights are present. The
color and the blinking sequence of these lights
provide information about the status and the
operation of the device.
See the scheme below for the meaning of the
panel lights.
panel lights.
No USB device detected.
USB Status light
USB Status light
USB Status light
USB Status light
USB pen drive detected, check in
progress.
USB pen drive properly connected
(it is possible to disconnect).
Device Status light
Device Status light
Device Status light
Device Status light
USB data transfer in progress
(do not disconnect!).
USB memory full.
USB device either not properly
formatted or not recognized.
(it is possible to disconnect).
USB connection
USB connection
USB connection
USB connection
The USB connection is available in the front panel.
Device Status light
Device Status light
Device Status light
Device Status light
OK - no activity.
Activity on communication ports
(e.g. data flow).
Data overflow and/or faulty data received.
If the problem persists,
service.
Low-power
sleep mode.
Stand
Stand
Stand
Stand –
–
–
–By light
By light
By light
By light
7
If the problem persists,
service.
Device error,
service.
Yellow
Red
Green
OFF
LEGENDA
LEGENDA
LEGENDA
LEGENDA