W & H Multiport 201 Instructions For Use Manual - page 6
Connection and operation
Connection and operation
Connection and operation
Connection and operation
Connection of other devices
Connection of other devices
Connection of other devices
Connection of other devices
- The serial port #2 is an expansion port for serial devices
Connection of the laboratory instrument
Connection of the laboratory instrument
Connection of the laboratory instrument
Connection of the laboratory instrument
The laboratory instrument (in the picture: a Sterilizer)
must be connected to the serial port #1.
(in the picture: a label printer). The serial port #2 also
supports the dongle key.
-The serial port #3 is an expansion port for serial devices
(in the picture: a printer).
-The USB connector (on the front) allows to connect USB
mass storage devices, like a pen drive.
Connection of the DC supply
Connection of the DC supply
Connection of the DC supply
Connection of the DC supply
-12-24VDC supply may be provided by the instrument
itself, if fitted with a specific DC-out plug (see instrument
user manual).
-If the instrument is not fitted with a 12-24VDC out-plug, a
Operation
Operation
Operation
Operation
The product is immediately operational as soon as connected.
-If the instrument is not fitted with a 12-24VDC out-plug, a
mains power adapter is available as an optional.
The functionality of the Multiport depends on the correct configuration
manual for the required settings.
Serial port #1
Serial port #3
Serial port #2
Dongle key
24 V supply socket
USB pen drive
Dongle key
USB connection
6
depends on the correct configuration the connected instrument: please refer to the instrument user
24 V supply adapter