Wacker Neuson BFS 1350AL Operator's Manual - page 11
T00833GB
9
DESCRIPTION
Description of function
The floor saw should only be operated in a forward direction (see arrow).
The drive engine (2), which is fastened to the frame, drives the cutting disc by way of a drive belt (7).
A hand crank (5) is used to operate the infinitely variable height adjuster on the blade, and 1 turn = 5 mm cutting
depth adjustment. At any time it is also possible to remove or introduce the cutting disc into the material to be
cut by way of the lever (3).
The blade guard (1) can be swung away upwards for easier fixing and removing of the blade.
The blade guard is moreover linked to the water tank via a hose and a coupling. If water is used with the blade,
this stops dust being created.
The coupling fitted to the water hose means an external water supply can be used.
A parking brake (6) has been included in the lower, right section of the console. The brake guarantees a safe
parking of the floor saw on upward or downward slopes or gradients.
The engine works according to the 4-stroke principle, is started by means of a recoil starter , takes in the air
via a dry air filter and is air colled.
The revs on the engine can be infinitely varied using the throttle control lever (4); the optimum cutting speed of
the blade is only achieved with the engine working at full load.
In order to facilitate the starting, the eingine is provieded with a choke.