Wacker Neuson BFS 1350AL Operator's Manual - page 13
T00834GB
11
TRANSPORT TO WORK SITE
Transport to work site
Conditions:
-
Only use suitable lifting equipment with a minimum lifting capacity of 200 kg for the transport of the floor saw.
-
Always switch off motor during transport!
-
Empty the water tank.
-
Attach appropriate secure lifting devices to the central lifting point (10) provided for this purpose.
-
Tie down the protection frame during transport of the floor saw on the bed of a vehicle.
-
Remove the cutting disc and place the floor saw in the lowest possible cutting position before transporting
the machine.
-
Turn up the guide wheel and fold the lever forwards.
-
Apply the parking brake.
-
Do not use the guide handle, the guide wheel or other operating devices or elements as lifting points.
Note:
Also refer to the specifications in Chapter, Safety Instructions.