Wacker Neuson BH24 Operator's Manual - Safety Instructions
Safety instructions
SV00044GB.fm
16
2.4
Maintenance
2.4.1
Only use original spare parts. Modifications to this machine, including
the adjustment of the maximum engine speed set by the manufacturer,
are subject to the express approval of WACKER. In case of
nonobservance all liabilities shall be refused.
2.4.2
Stop engine and pull off spark plug cap (if available) before carrying
out maintenance jobs, to avoid unintentional starting of the machine.
Deviations from this are only allowed if the maintenance job requires a
running engine.
2.4.3
Take care when checking the ignition system.
The electronic ignition system produces a very high voltage.
2.4.4
All safety devices must be reinstalled properly immediately after
maintenance and repair jobs have been completed.
2.5
Transport
2.5.1
When being transported on vehicles, precautions have to be taken that
these hammers do not slip or turn over.
2.6
Maintenance checks
2.6.1
According to the conditions and frequency of use, drilling and breaking
hammers have to be checked for safe operation at least once a year
by skilled technicians, such as those found at WACKER-service
depots and have to be repaired if necessary.
Please also observe the corresponding rules and regulations valid in your
country.