Wacker Neuson BS 60-4s Operator's Manual - Operation
Operation
BS 60-4s
32
wc_tx001488gb.fm
5.7
Low Oil Shutoff Switch
The low oil shutoff switch is designed to prevent engine damage
caused by an insufficient amount of oil.
When starting the machine:
•
if the warning light flashes quickly once, this indicates the engine
oil level is acceptable.
•
if the warning light flashes slowly, the engine will start but shut off
after 10-12 seconds, this indicates that the engine oil level is low.
Add oil to the engine. See Technical Data for oil quantity and
type.
•
if the warning light stays on continuously, the engine will start and
continue to run but the low oil shutoff switch is not functioning
properly. Check the switch for proper wire connections. If the light
continues to stay on, replace the switch.
•
if the warning light does not flash quickly once, and the engine
starts and continues to run, the low oil shutoff switch is not func-
tioning properly. Check the switch for proper wire connections
and grounding. If the light still does not flash when starting the
machine, replace the switch.
5.8
Emergency Shutdown Procedure
Procedure
If a breakdown or accident occurs while the machine is operating,
follow the procedure below:
5.8.1
Reduce engine speed to idle.
5.8.2
Stop the engine.
5.8.3
Close the fuel valve.
5.8.4
Contact the rental yard or machine owner for further instructions.