Wacker Neuson DPU 4545 Operator's Manual - page 20
7 Transport
20
100_0202_tr_0006.fm
7
Transport
7.1
Loading and transport
Carry out preparations
When loading and transporting, the center pole must be locked into place by engaging the center pole
lock in the vertical position.
WARNING
Improper handling may result in injury or serious material damage.
Please read and follow all safety instructions in this operator's manual.
DANGER
Danger from falling.
Falling machines can cause serious injury e.g. through crushing.
Only use suitable and tested lifting gear and tackle (safety load hooks) of sufficient
lifting capacity.
Only lift the machine from the central lifting point.
Reliably secure the machine to the lifting gear.
Do not lift the machine on the central lifting point with a forklift or excavator bucket.
Do not lift the machine at the control handle.
Evacuate danger zone while lifting, do not stop under suspended loads.
WARNING
Risk of fire and explosion from fuel.
Escaping fuel may catch fire and cause serious burns.
Lift and transport the machine upright.
CAUTION
If the central lifting point of the machine is fixed offset, the machine is no longer in the
center of gravity and may tilt to the rear.
NOTICE
Wacker Neuson recommends emptying the fuel tank prior to transport.
Item
Designation
Item
Designation
1
Center pole
2
Handle center pole lock
2
1