Wacker Neuson DPU 4545 Operator's Manual - page 31
9 Maintenance
100_0202_mt_0008.fm
31
9.1
Maintenance table
9.2
Maintenance jobs
Maintenance jobs
Daily
h/year
Weekly
Monthly
Clean the machine
Visual inspection for completeness
Visual inspection for damage
Check the engine oil level*
Replace the engine oil*
25 h/250 h
Replace the engine oil filter*
25 h/250 h
Clean, set, repair, replace the injection nozzles*
1500 hours
Clean, set, repair the injection valve*
3000 hours
Replace the fuel filter*
500 hours
Check water trap*
Check the intake area of the combustion air*
Check air cleaner service indicator*
Clean the air cleaner cartridge*
500 hours
Check the tapped clearance**
25 h/250 h
Check the exciter oil level
Replace the exciter oil
250 h/1/2
year
Check hydraulic oil level**
Check hydraulic hose lines**
125 hours
Check / replace the V-belt
Check the rubber buffer**
125 hours
Check the to ensure the screwed connections are firmly
seated
Re-lubricate the threaded spindle and ratchet pin
*
Note the engine operator's manual.
**
Have this work performed by the service department of your Wacker Neuson contact partner.
CAUTION
Health risk from fuel, lubricants and coolants.
Do not inhale fuel, lubricants, coolants or vapors.
Avoid contact of skin or eyes with fuel, lubricants and coolants.