Wacker Neuson EHB 11 BL Operator's Manual - page 26
Other manuals for EHB 11 BL:
Operator's Manual, Operator's Manual
Manual is about: Electric hammer
of
56
Operation
EHB 11
26
Operator’s manual
7.2
Adjusting the machine
7.2.1
Operating mode
Selecting the operating mode
Check position of adjusting lever for chiseling/hammer drilling.
Adjust the position of the chiseling/hammer drilling adjusting lever to meet the
needs of the respective application:
f Rotate the chiseling/hammer drilling adjusting lever a half a turn until lever
locks into place.
WARNING
Starting the machine during switching!
Danger of injury with uncontrolled start up.
f Actuate adjusting lever for chiseling/hammer drilling only after machine has
come to a complete standstill.
Item
Designation
1
Adjusting lever for chiseling/
hammer drilling