Wacker Neuson EHB 11 BL Operator's Manual - page 32
Other manuals for EHB 11 BL:
Operator's Manual, Operator's Manual
Manual is about: Electric hammer
of
56
Operation
EHB 11
32
Operator’s manual
7.3
Changing tools
7.3.1
General instructions
General notes
Tools are easily changed with all tool holders without requiring additional tools.
Only use tools with intact shanks.
Before inserting the tool, ensure that the tool is sufficiently sharpened and that it
is suitable for the intended application.
7.3.2
Tool holder SDS-max
Inserting tool
1. Clean tool end.
2. Insert tool into tool holder.
3. Turn tool and press into holder until automatically locked into place.
4. Check to see if the tool is locked by pulling on the tool.
Item
Designation
1
Tool
2
Tool holder