Wacker Neuson EHB 11 BL Operator's Manual - page 40
Other manuals for EHB 11 BL:
Operator's Manual, Operator's Manual
Manual is about: Electric hammer
of
56
Maintenance
EHB 11
40
Operator’s manual
Lubricating the crank mechanism
Only use special lubricants for lubricating.
For further information, refer to chapter Technical Data.
1. Place filled grease gun onto the zerk fitting and operate 5 to 6 times.
2. Wipe off zerk fitting with a clean cloth.
Checking the tool holder for wear
f Measure the tool play 200 mm from insertion point.
Play may not exceed 6 mm.
If the play exceeds 6 mm, the tool holder bushing in the tool holder must be re-
placed.
Item
Designation
1
Zerk fitting
Item
Value
A
200 mm
B
Max. 6 mm