Wacker Neuson EHB 11 BL Operator's Manual - page 34
Other manuals for EHB 11 BL:
Operator's Manual, Operator's Manual
Manual is about: Electric hammer
of
56
Operation
EHB 11
34
Operator’s manual
7.3.3
Tool holder for tool with hexagonal bolt
Inserting tool
1. Clean tool end.
2. Swivel out retaining spring.
3. Push tool into the tool holder as far as it will go.
4. Return retaining spring to original position.
5. Check to see if the tool is locked by pulling on the tool.
Removing tool
1. Swivel out retaining spring.
2. Remove tool from the tool holder.
3. Return retaining spring to original position.
Item
Designation
1
Tool
2
Retaining spring