WAGNER ProjectPro 119 Owner's Manual - Components and Description
27
WAGNER Project Pro 119 - 0418C - Safety Information
Components and Description
The shipping carton for your painting system contains the following:
• Suctionline(includinginletfilter)andreturnline(includingmetalclip)
•Spraytipassembly
• 15m,6.35mminternaldiameterpressurehose
•Basicunit
• Spraygunwithtwofilters(L-XXL;oneingun,oneseparate)
•Instructionmanual
• Hosebracket
•Oilflask
Figure 1 - Controls and Functions
(further, detailed descriptions of the individual items can be found in the relevant section of the operating instructions)
Item
Component
Description
A)
ON/OFFSwitch ............................The ON/OFF switch turns the power to the sprayer on and off (O=OFF, l=ON).
B)
PRIME/SPRAYKnob ....................ThePRIME/SPRAYknobdirectsfluidtothesprayhosewhensettoSPRAYorthereturntubewhenset
toPRIME.ThearrowsonthePRIME/SPRAYknobshowstherotationdirectionsforPRIMEandSPRAY.
ThePRIME/SPRAYknobisalsousedtorelievepressurebuiltupinthesprayhose(seePressureRelief
Procedure).
C)
Sureflo™Valve ................................TheSureflo™valveisdesignedtokeeptheinletvalveopenandfromstickingduetodriedmaterials.
TheSureflo™valveisactivatedautomaticallyeverytimeyouturntheON/OFFswitchON.
D)
PressureTrac™ ................................ThePressureTrac™regulatestheamountofforcethepumpusestopushthefluid.
E)
PumpSection .................................Apistoninthepumpsectionmovesupanddowntocreatethesuctionthatdrawsfluidthroughthe
suction tube.
F)
SuctionTube ..................................Fluid is drawn through the suction tube into the pump.
G)
ReturnTube ....................................FluidissentbackoutthroughthereturntubetotheoriginalcontainerwhenPRIME/SPRAYknobisin
PRIMEposition.
H)
Inlet filter ..........................................The inlet filter strains the spray material to prevent the system from becoming clogged.
I)
Hose bracket ...................................Attach the hose bracket by inserting the ends of the bracket into the holes of the handle as shown.
J)
SprayGun ........................................Thesprayguncontrolsthedeliveryofthefluidbeingpumped.
K)
SprayHose ......................................The spray hose connects the gun to the pump.
When working outdoors:
Danger
Vapors containing solvents may not be allowed to
blow toward the unit.
Note the direction of the wind.
Set the unit up in such a way that vapors containing
solvents do not reach the unit and build up there.
A minimum distance of 5 m between the unit and
spray gun is to be maintained.
U
Cleaning the unit
Danger
Danger of short circuit through penetrating water!
Never spray down the unit with high-pressure or
high-pressure steam cleaners.
U
Cleaning units with solvents
Danger
When cleaning the unit with solvents, the solvent
should never be sprayed or pumped back into a
container with a small opening (bunghole). An
explosive gas/air mixture can be produced. The
container must be earthed.
Do not clean the device or accessories with
flammable solvents with a flash point below 21 °C.
U
Earthing of the object
The object to be coated must be earthed.
Technical Data
Pump type
Piston pump
Power source
220 V
~
60 Hz
Power consumption
720 W
Fusing
Only connect to sockets protected
with an FI fuse (16 A)
Double insulation
Max. spray pressure
200 bar
Max. delivery rate
1,3 l/min
Soundpressurelevel
71,2 dB (A)
Oscillation level
< 2,5 m/s²
Max. temperature of coating
substance
40°C
Max. nozzle size
XL(0,019")
Hose length
15 m
Weight
18 kg
CoatingMaterialsSuitableforUse
Water-based and solvent-containing lacquers and glazes.
Paints, oils, release agents, synthetic enamels, PVC lacquers,
undercoats, base coats, fillers and anti-rust paints.
Dispersion and latex paints for interior use.
CoatingMaterialsNotSuitableforUse
Materials that contain highly abrasive components, facade paint,
caustic solutions and acidic coating substances.
Materialswithaflashpointbelow21°C.
i
In order to ensure compatibility of the coating substance
with the materials used to manufacture the device, please
contactWagnerServiceincasesofdoubt.