Waldman Kryptton User Manual - page 13
GM ON /
GM ON (Krypton 49/61)
GM2 ON /
GM2 ON (Krypton 49/61)
GS ON /
GS ON (Krypton 49/61)
XG ON /
XG ON (Krypton 49/61)
PRESET /
PRESET (Krypton 49/61)
CLEAN /
CLEAN (Krypton 49/61)
RESET /
RESET
Note: please refer to above
explanation for other
unmentioned operation.
NOTA: Utilize a explicação acima
para outras operações não
mencionadas.
Pressione o botão EDIT para acessar o modo
multifunção do teclado e então pressione GM ON
para transmitir mensagem de inicialização GM (F0 7E
7F 09 01 F7).
Press EDIT button to enter keyboard multi-function
mode, and then press GM2 ON to transmit GM2
initialization message (F0 7E 7F 09 03 F7).
Press EDIT button to enter keyboard multi-function
mode, and then press GS ON to transmit GS
initialization message (F0 41 10 42 12 40 00 7F 00 41
F7).
Press EDIT button to enter keyboard multi-function
mode, and then press XG ON to transmit XG
initialization message (F0 43 10 4C 00 00 7E 00 F7).
Press EDIT button to enter keyboard multi-function
mode, and then press PRESET to return to factory
preset. System starts SNAP SHOT function to transmit
preset to sequent device.
While using numeric pad to enter numbers, press
CLEAN button to set the number to 0.
If not especially mentioned, press DATA +/- buttons at
the same time to set controlled parameter to 0.
Press EDIT button to enter keyboard multi-function mode,
and then press GM ON to transmit GM initialization
message (F0 7E 7F 09 01 F7).
Press EDIT button to enter keyboard multi-function mode,
and then press GM2 ON to transmit GM2 initialization
message (F0 7E 7F 09 03 F7).
Pressione o botão EDIT para acessar o modo multifunção
do teclado e então pressione GS ON para transmitir
mensagem de inicialização GS (F0 41 10 42 12 40 00 7F
00 41 F7).
Pressione o botão EDIT para acessar o modo multifunção
do teclado e então pressione XG ON para transmitir
mensagem de inicialização XG (F0 43 10 4C 00 00 7E 00
F7).
Pressione o botão EDIT para acessar o modo multifunção
do teclado e então pressione PRESET para retornar ao
preset de fábrica. O sistema inicia a função SNAP SHOT
para transmitir preset para o aparelho subseqüente.
Enquanto usa o pad numérico para acessar os números,
pressione o botão CLEAN para ajustar o número para 0.
Para “resetar” a unidade, pressione os botões DATA +/-
simultaneamente para ajustar o parâmetro controlado
em 0.