Waldorf GP120G Operation Manual - page 12

10 

Installation

Clearances 

NOTE:  Only non-combustible materials can be used in close proximity to this appliance. 

Assembly 

This model is delivered completely assembled.  Ensure legs are securely attached. 

NOTE: 

 This appliance is fitted with adjustable feet to  

enable it to be positioned securely and level on 

uneven floors.  This should be carried out on  

completion of gas connection.  Refer to 'Gas Con-

nection Section'. 

 This appliance can also be fitted with rear rollers to 

enable appliance to be easily moved for  

positioning and cleaning purposes.  If desired,  

rollers are supplied in the packaging, with  

appliance.  See below for fitting instructions. 

Optional Accessories (Refer to Replacement Parts 

List) 

 Plinth Kit.  For installation details, refer to instructions 

supplied with each kit. 

Fitting Rear Rollers. 

1. 

Raise appliance from floor by approx. 75mm 

using suitable lifting equipment (i.e. Palletiser / 

Forklift) to allow rear adjustable feet to be 

removed. 

2. 

Unscrew and remove both rear adjustable feet 

from rear leg housings. 

3. 

Fit rear roller to rear leg housing and align 

screw hole in side of rear leg housing with 

threaded hole in rear roller. 

4. 

Secure rear roller to leg support with bolt 

supplied and tighten bolt using a 10mm A/F 

spanner. 

5. 

Fit second roller and tighten. 

6. 

Lower appliance back to floor and adjust front 

adjustable feet to level appliance. 

Combustible Surface 

Non Combustible Surface 

Left / Right Hand Side 

50mm 

0mm 

Rear 

50mm 

0mm 

Fig 1 

Appliance 

Base 

Adjustable 

Foot 

Rear Roller 

Assy 

Rear Leg 

Housing 

Roller 

Locating Bolt