Waldorf GP120G Operation Manual - page 14

12 

Installation

7. 

Check gas operating pressure is as shown in ‘Specifications’ section. 

NOTE: Operating pressure is to be measured 

at burner operating pressure test point 

outlet and with one griddle burner  

operating at the ‘High Flame’ setting. 

8. 

Turn ‘Off’ mains gas supply and bleed gas 

out of appliance gas lines. 

9. 

Turn ‘On’ gas supply and appliance. 

10.  Verify operating pressure remains correct. 

Commissioning 

Before leaving the new installation; 

Check the following functions as shown in operating instructions specified in ‘Operation’ section of 

this manual. 

 Light the Pilot Burner. 

 Light the Main Burner. 

 Turning 'Off' the Main Burner / Pilot. 

Ensure operator has been instructed in areas of correct lighting, operation, and shutdown procedure 

for appliance. 

This manual must be kept by owner for future reference and a record of 

Date of Purchase,

Date of 

Installation 

and 

Serial Number of Appliance 

must be recorded and kept with this manual.  (These 

details can be found on Rating Plate, refer to ‘Dimensions’ section for locations of Rating Plate 

for different applications.  Also refer to ‘Gas Connection’ section). 

NOTE:  If for some reason it is not possible to get appliance to operate correctly, shut ‘Off’ gas  

supply and contact supplier of this appliance. 

For Refrigeration Cabinet Installation refer to Refrigeration Cabinet Installation and Operation 

Manual supplied with appliance. 

Burner Operating Pressure 

Test Point (Outlet) 

Fig 3