Waldorf GP120G Operation Manual - page 25
23
Replacement Parts List
Replacement Parts List
When ordering replacement parts, please quote part number and description as listed below. If part
required is not listed below, request part by description and quote model number and serial number which
is shown on rating plate.
Controls
227444 Burner
(GP8600G).
227443 Burner
(GP8900G
/
GP8120G).
232229 Pilot
Burner
Kit.
229407
Overtemp 365° Millivolt.
229885
Thermocouple Interruped - Leaded
(If Overtemp Fitted).
019218
Thermocouple
(If no Overtemp Fitted).
227508 Piezo
Igniter.
228010 Piezo
Housing.
229731
Piezo HT Lead 250mm.
230416
Gas Control / Thermostat.
228393
Knob Adaptor Eurosit.
227386
Gas Control Knob - 100°C to 290°C.
032360
Main Injector
(Nat) Ø 3.60mm
(GP8600G - Non-UK).
032340
Main Injector
(Nat) Ø 3.40mm
(GP8600G - UK only).
032300
Main Injector
(Nat) Ø 3.00mm
(GP8900G).
032285
Main Injector
(Nat) Ø 2.85mm
(GP8120G).
032210
Main Injector
(LPG) Ø 2.10mm
(GP8600G).
032180
Main Injector
(LPG) Ø 1.80mm
(GP8900G).
032170
Main Injector
(LPG) Ø 1.70mm
(GP8120G).
019593
Pilot Injector
(Nat) 0.41.
019594
Pilot Injector
(LPG) 0.25.
228531
Regulator (RV48CLM) - (Natural Gas/LPG - convertible) - ¾” BSP female.
General
228400 Grease
Drawer.
227850
Leg 150mm (Adjustable) (Flush Stud)
- CB and RB Models.
227851
Leg 150mm (Adjustable) (Extended Stud) - LS Models.
227855
Leg 80mm
- B Models.
229674
Rear Roller Assy
- CB and LS Models.
232351
Rear Roller Assy (3”)
- RB Models.
Griddle Plate Options
Griddle Plate
Standard
Chromed-(C)
Ribbed & Chromed Options
600mm 228584 228157
900mm 228585 227641
1200mm 228586 227650
ON REQUEST (depending on ribbed section
width on LH or RH side.
IMPORTANT:
Only genuine authorized replacement parts should be used for servicing and
repair of this appliance. Instructions supplied with parts should be followed
when replacing components.
For further information and servicing instructions, contact your nearest
authorized service branch (contact details are as shown on reverse of front
cover of this manual).