Waldorf GP120G Operation Manual - page 23

21 

Gas Conversion and Specifications

NOTE, Pin rotated 

for Natural Gas 

NOTE, Pin rotated 

for LPG 

Gas Regulator 

NOTE: 

Gas regulator supplied is 

convertible between Natural Gas 

and LP Gas, but it’s outlet 

pressure is fixed ex-factory and 

is NOT to be adjusted. 

Gas Type Labels 

On completion of gas conversion, replace gas type labels located at:- 

- Rear of unit, above gas connection. 

- Beside rating plate. 

Commissioning 

Before leaving installation; 

1. 

Check all gas connections for leakage using soapy water or other gas detecting equipment. 

2. 

Carry out a ‘Commissioning’ check of appliance as shown in Installation Section of this manual. 

3. 

Ensure any adjustments done to components that have adjustments / settings paint sealed are to be 

re-sealed. 

NOTE:  If for some reason it is not possible to get the appliance to operate correctly, shut off the 

gas supply and contact the supplier of this appliance. 

D

O

NOT

USE

A

NAKED

FLAME

TO

CHECK

FOR

GAS

LEAKAGES

. 

Warning