Waldorf KB 37 User Manual - page 5
4
DEVICE OVERVIEW
2
Device Maintenance
• Refer all service and repair tasks to qualified personnel.
• Use only a soft cloth or brush to clean the device surface.
• Never use cleaning chemicals as they will damage the device surface.
3
Package Contents
The KB37 package contains the following parts:
• KB37 controller keyboard
• AC power plug
A Phillips-head screwdriver (#0) is needed to mount your modules into the mod-
ule frame. No additional tools are needed.
4
Device Overview
4.1
Module Frame with Bus Backplane
The module frame is the place where you mount your modules. Inside the frame
there is a backplane with pin headers to connect the modules to the A-100 bus.
The bus provides power as well as an interconnection for CV and Gate which
can then be shared between the KB37 and certain modules.
1
Pin headers for connecting the modules
2
LEDs for indicating +12V and -12V bus power
3
Ground link jumper for connection between internal ground
and chassis (factory pre-installed)
4
Jumpers for linking the bus CV/Gate signals to the KB37
CV interface (factory pre-installed)
5
Extension connectors for option boards which may eventu-
ally be released before the strike of the next millenium
5