Waldorf RN8110GE Installation And Operation Manual - page 9
7
7. Components
having
adjustments
protected (e.g. paint sealed) by manufacturer are only allowed to
be adjusted by an authorised service agent. They are not to be adjusted by the installation person.
NOTE: Do not obstruct or block the appliances flue. Never directly connect a ventilation system to
the appliance flue outlet.
Clearances
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
* Side clearances can be 50mm when the adjacent surface is at least 100mm below the cooking
surface.
Assembly
This model is delivered completely assembled. Ensure that the
legs are securely attached.
NOTE:
• This appliance is fitted with adjustable feet to
enable it to be positioned securely and level on
uneven floors. This should be carried out on
completion of the gas connection. Refer to the
'Gas Connection Section'.
• This appliance can also be fitted with rear rollers to
enable the appliance to be easily moved for
positioning and cleaning purposes. If desired,
these rollers are supplied in the packaging, with
the appliance. See below for fitting instructions.
Optional Accessories (Refer to Replacement Parts
List)
• Plinth Kit. For installation details, refer to the
instructions supplied with each kit.
Fitting Rear Rollers.
1.
Raise the appliance from the floor by approx.
75mm using suitable lifting equipment (i.e.
Palletiser / Forklift) to allow the rear adjustable
feet to be removed.
2.
Unscrew and remove both the rear adjustable
feet from the rear leg housings.
3.
Fit the rear roller to the rear leg housing and
align the screw hole in the side of the rear leg
housing with the threaded hole in the rear
roller.
4.
Secure the rear roller to the leg support with the
bolt supplied and tighten the bolt using a 10mm
A/F spanner.
5.
Fit the second roller and tighten.
6.
Lower the appliance back to the floor and adjust
the front adjustable feet to level the appliance.
Installation
Combustible Surface
Non Combustible Surface
Left / Right hand side
50mm
0mm
Rear
50mm
0mm
Fig 1
Appliance
Base
Adjustable
Foot
Rear Roller
Assy
Rear Leg
Housing
Roller
Locating Bolt
gpd.sunwayinfo.com.cn
gpd.sunwayinfo.com.cn