Waldorf RN8410G Installation And Operation Manual - page 12
10
Operation
Operation Guide
1.
Waldorf appliances have been designed to provide simplicity of operation and 100% safety
protection.
2.
Improper operation is almost impossible, however bad operation practices can reduce the life of the
appliance and produce a poor quality product. To use this appliance correctly please read the
following sections carefully:-
Lighting the Open Burners (F - Flame Failure Option).
Lighting the Open Burners (PF - Pilot and Flame Failure Option).
Lighting the Griddle.
Oven Pilot Ignition.
Oven Main Burner / Thermostat.
Turning Oven to ‘Stand-By’ (Pilot 'ON' Only).
Oven ‘Shut-Down’.
Description of Controls
Fig 3
Griddle Piezo
Igniter (When fitted
with Griddle Option
Only)
Gas Control Knobs
(When Fitted with
Griddle Option Only)
OFF Position
PILOT Burner
HIGH Flame
LOW Flame
Gas Control Knob
(Oven)
OFF Position
PILOT Burner
Temperature
Graduations 130°C
to 270°C
Gas Control Knobs
(Open Burner
Option)
OFF Position
HIGH Flame
LOW Flame
Oven Piezo Igniter
(One per Oven)
This appliance is for professional use and is only to be used by qualified
persons.
Only authorised service persons are to carry out installation, servicing or gas
conversion operations.
Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.
Caution