1 copy of instruction manual wind machine 500 gewerbering 26 86666 burgheim tel. +49/84 32 / 9489-0 fax: +49/84 32 / 9489 - 8333 email: info@foto-walser.De www.Foto-walser.De.
2 content 1. How to understand the instruction manual .................................................... 4 1.1 markings on the device .......................................................................................... 4 1.2 markings in the manual ...............................................
3 thank you very much for your confidence. We wish you much pleasure and success with your new device. With the walimex wind machine 500 you can bring more flow in your pictures and it helps you to work more professional in people and beauty photography. Due to the stepless adjustable power output o...
4 1. How to understand the instruction manual 1.1 markings on the device this marking means, that your device meets the safety requirements of all relevant european directives. This marking means, that your device should be disposed in the local disposal points. 1.2 markings in the manual marking me...
5 − unplug the power cord, if the flash is not in use for a long time. Warning danger of electric shock, fire through short-circuit a short-circuit could be caused through defect cables and through humidity or moisture. A short- circuit can warm up the conductors, so that there isolation will melt o...
6 4. Overview about the parts 1. Housing 2. Fastening lever tilt angle 3. Mounting bracket 4. Fastening lever tripod holder 5. On/off tappet switch 6. Fuse holder 7. Jack for power supply 8. Safety guard 9. Output controller 5. Quick start guide advice: the detailed instruction for the following ope...
7 6. Preparation for operation 6.1 mount on lamp tripod warning mount the device only on the provided lamp tripod. Make sure, that the tripod with the mounted device has a tilt and skid resistant stand. • put the device with the mounting bracket onto the lamp tripod. • tighten the two fixing screw f...
8 8. Transportation and storage • switch off device. See switch on and off of device. • let the device come to a complete stillstand. • plug out the power cord from the device. • demount wind machine from lamp tripod. • clean the device if necessary. See cleaning. • put the device and all demounted ...
9 wind machine 500 cleaning housing use a microfiber cloth to remove light and stubborn dirt 10.3 change micro-fuse warning danger of electric shock and fire through short-circuit a micro-fuse, which is not conform with the required specifications, doesn´t protect against the overloading of the devi...
10 13. Technical specifications device power supply ac 220 - 230 v / 50 hz weight 10,7 kg rotatable on spigot 360 ° dimensions (hxwxd)/ tunnel diameter approx. 28 cm / Ø 48 cm micro-fuse 3 a air flow approx. 2880 qm/h propeller rotation approx. 1400 u/min accessories power cord (approx.4 m).
