Walimex 16280 Instruction Manual - page 9
9
Wind Machine 500
Cleaning
Housing
Use a microfiber cloth to remove light and
stubborn dirt
10.3
Change micro-fuse
WARNING
Danger of electric shock and fire through short-circuit
A micro-fuse, which is not conform with the required specifications, doesn´t protect against the
overloading of the device.
Please just use a micro-fuse, which is conform with the required specifications. See Technical
Specifications.
•
Switch off device.
See Switch on and off of device.
•
Disconnect from power supply:
Unplug power cord.
•
Open fuse holder:
Use a small screwdriver to lift up the fuse holder carefully
and slightly.
•
Pull out the fuse holder with your hands completely out of
the slot.
•
Take out the old micro-fuse.
•
Slide the new micro-fuse in the center of the holder.
•
Screw up the fuse holder with a small screwdriver.
11.
Spare parts
Part of the device
Item number
Power cord
12914
12.
Disposal and environment protection
Your device should be disposed free of charge at the local disposal points.
Fuse holder