Walimex 16280 Instruction Manual - page 8
8
8.
Transportation and storage
•
Switch off device.
See Switch on and off of device.
•
Let the device come to a complete stillstand.
•
Plug out the power cord from the device.
•
Demount wind machine from lamp tripod.
•
Clean the device if necessary.
See Cleaning.
•
Put the device and all demounted elements in one carton and carry and store them according to
the requirements in the technical specifications. See Technical specifications.
9.
Solve problems
Problem
Possible reason
Remedy
Device is switched on,
but has no function
Power cord is not
plugged or plugged
incorrect
Plug in the power
cord correctly
Micro-fuse is defect
Change micro-fuse,
see Change micro-
fuse
10.
Maintenance
10.1
Continuous inspections
What you should do?
Before every
operation
With every
change
Check all cables and plugs for damages
In case of damage:
WARNING! Danger of electric shock
and fire through short-circuit. The device
should be repaired by an electrician
immediately
X
10.2
Cleaning
WARNING
Risk of injury for hands and fingers
Never insert your fingers, objects or clothing through the safety guard. This could lead to heavy
injuries on fingers and hands. Let the fan come to a standstill before starting any cleaning or
maintenance arrangements.
WARNING
Danger of electric shock
−
The contact with moisture or water should be avoided.
−
Unplug the power cord before cleaning the device.
ADVICE: Just use the following specified cleaning supllies.