Walimex Pro TTL FW 950 Instruction Manual - page 4
of
6
4
2.
Attaching the Speedlite to the camera
Turn the locking wheel clockwise
and loosen it as much as possible.
Slide the mount of the flash device
into the accessory shoe of the
camera.
Turn the ring clockwise in order to
fasten it.
In order to remove the flash,
loosen the fastened locking wheel.
Slide the flash out of the accessory
shoe of the camera.
III.
Use of the Speedlite
1.
Switching the device on/off
Switching it on: Press the ON/OFF switch for approx. 2 seconds
Trigger test flash, briefly press the PILOT button.
Switching it off: Press the ON/OFF switch for approx. 2 seconds
2.
TTL mode
Press the MODE button until TTL appears on the display.
Depending on your camera type, set your camera mode to