Walimex Pro TTL FW 950 Instruction Manual - page 6
6
IV.
Advanced use
1.
Indirect Flashing
Indirect flashing means that you photograph by reflecting the flash
from a wall or the ceiling to make the light softer.
2.
Use of the reflector screen for photographing
Pull the reflector screen and the wide angle diffusion disk from the flash head at the same
time and push the wide angle diffusion disk back into the flash head. In this case the flash
creates an attractive highlight in the eyes. This effect is achieved optimally when the flash
head is angled by 90°.
3.
Use of the wide angle diffusion disk
Pull out the built-in wide angle diffusion disk in order to enlarge the
light angle of the flash. This way you receive softer and more natural
flash light.
V.
Technical specifications
Guide Number
42 (ISO 100,105mm)
Flash Modes
TTL, M, Stroboscope, S,
Vertical Tilting Angle
0–90 degrees
Horizontal Rotation Angle
0–270 degrees
Power Supply
4x AA batteries (Alkaline or Ni-MH)
Flash Number
100 (full output)
Recycle Time
approx. 0.4s (with AA Alkaline
batteries)
Output Levels
1/8 aperture stops
Color Temperature
5600K±200K
Flash Duration
1/200s~1/20000s
Dimensions
approx. 200x75x57mm
Weight
approx. 340g
Scope of delivery: 1x flash device, 1x mini flash stand, 1x transport bag, 1x manual