WANHAO DUPLICATOR I3 MINI Instruction Manual - 3.2 Home Screen

SETUP

3.2 Home Screen

*  Printer Status: Current printer status or memory card status if removed or inserted

*  Elapsed Time: Length of time the current model has been printing (if applicable)

*  Progress: Displays percentage of model completed (if applicable)

*  Speed:Current printing speed - 100 % is full speed 

NOTE: The initial pringting speed is defined in the GCODE file, not by the printer

*  Extruder Temperature: The temperature shown above the       symbol is the  

set/target temperature. The temperature below the same symbol is the current 

temperature.

NOTE: When no temperature is set, the extruder will register the current ambient 

temperature.

3.3 Navigating the Menus

1.  

To enter the Main Menu, quickly press and release the Dial button

2.   

To move throughout the menu, turn the Dial Button.Note some menus have 

        options not visible one the screen. Keep turning the dial to see all options available

3. 

   To make a selection, quickly press and release the Dial Button

4.   

To move to the previous menu or exit, highlight 'back'at the top of each menu 

        and push the Dial Button

16