WANHAO DUPLICATOR I3 MINI Instruction Manual - 4.7 Filament
of
38
24
SETUP
4.7 Filament
The WANHAO Duplicator I3 Mini is designed to be only used with PLA(Polylactic Acid BioPlastic)
fialment.Only use genuine WANHAO filaments as using generic filaments may damage your 3D
printer and may void your warranty. Extra filament including multiple colours and PLA types are
availabe from the online store at id.aliexpress.com/store/120824V
4.7.1 PLA filament
Extruder Temp:
215
°C
Official Name:
Polyactic Acid
Printing Level:
Basic
Advantages:
* Bioplastic
* Non-Toxic
* Less warping issues
* Hard or soft/flexible variants
* High print speed
Disadvantages:
* Low heat resistance
* Easier break than ABS
* Requires thicker walls than ABS
Finishing:
* Sanding possible
* Limited gluing