Wanscam AJ series User Manual - 3.4.1 Multi-Device
IPCAM User Manual
15
OSD: In the video display date and time. You can disable the OSD function or choose the
color of OSD.
Snapshot Photo: Click the icon
interception photo.
Video: Click
icon to enter the recording mode, the icon becomes
,again, click
the end of the recording.
3.4. Manager Operation
When you logged on as Administrator, click on “Administrator action” to enter
setting interface. Device Information: You can see the device serial number,
equipment systems and device firmware version of the application firmware
version of the.
Alias setting : You can set your favorite device aliases.
Date&Time set : seting the date and time.
Uer settings : Can be set up to 8 users. On this page you can set up accounts of
the user name, password, as well as in their packet (administrator, operator,
visitor).
z Visitor : In this mode, you can only visit.
z Operator :You can set the direction of the lens device, set the video screen’s
brightness, contrast and other parameter.
z Administrator : You can set the device advanced configuration.
UPnP set :If you want internet access IPCAM, to ensure that the state is
successful UPnP.
Device Firmware Upgrade: The system firmware update the device firmware
and application of
Restore factory settings : When there is not a response when the error
occurred, you can restore the factory settings to resolve the device.
I rebooted the device :I rebooted the device.
Back: Return to monitor mode
3.4.1 Multi-Device
Settings
z Add a local area network equipment
In the multi-device configuration page, you can see all the equipment inside
the LAN. The first device is the default device. You can add more devices listed
in the list of equipment. Embedded applications, up to 4 devices at the same
time-line. Click the “second road equipment” and double-click “Current list of
devices in the LAN” in the device entry name, host address, Http port will
automatically be filled, require the user to fill in the correct account name and