WarmlyYours FeelsWarm Installation Instructions Manual - Before You Begin
Package Contents:
• Adhesive-backed heating element
• Thermal Control Unit
• Transformer (with power cord)
• Velcro packet
• Hole plug
• Peel test strip
• Thermal Control Unit mounting tape
• Instruction manual
• Surface Prep Kit
• 2 cans of epoxy (Part A and Part B)
• Small brush
• Tongue depressor
• Programmable timer (optional)
Recommended Tools and Supplies:
• Handheld electric drill with 3/4” spade bit (an extended length bit may be needed if running the cabling into a double-
wall cabinet)
• Several dry cotton rags
• Isopropyl alcohol
• Quart-sized container that can be discarded after use
• 1/16” drill bit
If Surface Prep Kit is used:
• Protective eyewear --REQUIRED
• Gloves and appropriate clothing
• Pencil
• Dropcloth or other material to protect carpet or flooring under the countertop
For large heating elements, WarmlyYours recommends having two people perform the installation.
Before You Begin
SECTION 1
2