1. DL manuals
  2. Warmup
  3. Thermostat
  4. 4iE
  5. Operating Manual

Warmup 4iE Operating Manual

Summary of 4iE

  • Page 1

    Welcome to warmup 4ie smart thermostat operating guide see reverse for installation guide.

  • Page 2

    2.

  • Page 3

    Introduction the 4ie default screen is the home screen. Pressing the temperature figure in the centre of the screen allows you to override it. Pressing the menu button allows you to start programming and setting up the 4ie. You’ll often find a help button on pages with several options to give more i...

  • Page 4

    Getting started on initial power up the 4ie will ask you to connect to set up various aspects: important! Ensure you choose the correct system type. Electric (underfloor), hydronic (underfloor) or conventional (central heating with radiators). • language • time • date • daylight savings • heating ty...

  • Page 5

    5.

  • Page 6

    Set your heating program with your 4ie, you can choose to set a custom heating schedule, fixed temperature or a preset program designed for different rooms. To adjust the program, you must highlight the days that you want to program by pressing them, then press program. You can select multiple days ...

  • Page 7

    Preset programs you can select a preset program schedule to get you started. You can edit the program whenever you like by following the steps in set your heating program below is a summary of the preset programs bathroom kitchen bedroom living room time temp time temp time temp time temp mon-fri 06...

  • Page 8

    Holiday mode holiday mode allows you to override your schedule with a fixed temperature over a number of days. This helps you save energy when you know you’ll be away for a while by setting a lower temperature. Holiday mode can be found in the program menu just set the start and end times of your ho...

  • Page 9

    9.

  • Page 10

    Energy monitor the 4ie learns how you use your system and how your house reacts to the heating and weather. It can give you an estimate of your energy usage and the running cost of your system. You will need to enter the power of your system, and in some cases, the efficiency. If you do not know the...

  • Page 11

    Settings the 4ie can be configured in different ways to suit you. The functions that can be accessed in the settings menu include: time set time manually set time set date manually set date daylight savings set daylight savings heating preferences temperature format choose celsius or farenheit contr...

  • Page 12

    Fil pilote this is a feature specifically for france. You must also connect fil pilote to terminal 1 master/relay this allows one thermostat to control another 1. Choose which thermostat is master and which is relay 2. Use low voltage cable to connect terminal 6 of both thermostats 3. Use low voltag...

  • Page 13

    Fil pilote this is a feature specifically for france. You must also connect fil pilote to terminal 1 master/relay this allows one thermostat to control another 1. Choose which thermostat is master and which is relay 2. Use low voltage cable to connect terminal 6 of both thermostats 3. Use low voltag...

  • Page 14

    Mounting thermostat thermostat 1. Push excess wire back through the wall box and insert thermostat back module into wall box. 2. Put fixing screws through mounting holes and tighten. 3. Ensure that thermostat is straight before tightening completely. 4. Replace thermostat front housing; i) align and...

  • Page 15

    Powering up you can now power up the thermostat and begin the programming process. An easy to follow menu will guide you through the rest. If you want to turn on / off the thermostat and heating system then hold down the recessed button on the bottom of the stat for 3 seconds error messages your the...

  • Page 16

    Installation separate the front housing of thermostat from wall module: 1. Unscrew both closing screws (bottom of stat) until they will not turn any further. 2. Release front housing by gripping lower half of outer frame and pulling outwards then upwards 3. Place front housing somewhere safe 4. Run ...

  • Page 17

    Contact us usa 52 federal road unit 1f 06810 danbury ct web: www.Warmup.Com email: us@warmup.Com installation guide canada 374 wellington st w m5v 1e3 toronto on web: www.Warmup.Ca email: ca@warmup.Com visit our online technical assistance website: warmupedia.Warmup.Com.