Warmup 4iE Operating Manual - page 10
Energy Monitor
The
4iE learns how you use your system and how your house reacts to the heating and weather. It can
give you an estimate of your energy usage and the running cost of your system.
You will need to enter the power of your system, and in some cases, the efficiency. If you do not
know these, speak to your installer or go to
warmup.com or warmup.ca
and use our online
Heat
Requirement Calculator.
You will also need to enter the cost of your energy, in order to calculate the running cost of your
system. Press
Energy Settings, and select if you have a single rate tariff or a standard/low energy
tariff (where you have a discounted cost during part of the day). Enter your cost per KWH and relevant
currency and, if required, the time the low energy tariff starts and stops and the discounted cost during
that time.
When you’ve set up the
Energy Monitor you can view the estimated usage or cost over a selected
time period. If you have a standard/low energy tariff, the amount and cost of energy used during
the standard period will be displayed in dark green and the amount used in the low period will be
displayed in light geen
10