Wascomat EX-30 S and EX-50 S Operating & Maintenance Manual - Programming
28
Programming
Codes 91 and 92 are used to store the values for
coin slots 1 and 2. For mechanisms with only one
slot, only code 91 is used.
The values to be stored are the ratio of one coin
to the other.
For example: if the coin slots are for a 10 cent
coin and a 50 cent coin. The value 10 should be
stored under code 91, and the value 50 should
be stored under code 92.
•
Enter code 91 using the buttons which have
become number keys 9 and 1.
The display will now show 91.
•
When entering the actual value: keep the
price-programming button activated (the
switch is located under the top cover at the
right front edge). Enter the value 1 and then
release the button.
•
Enter code 92. The display will now show 92.
•
Enter the value 5.
•
Exit the service program by pressing the
service button again.
2275
2274
2276
2272
3400
39
40
41
42
43
Fig.
39
Fig.
40
Fig.
41
Fig.
42
Fig.
43