Wascomat EX-30 S and EX-50 S Operating & Maintenance Manual - Program Control Unit
of
88
41
Program control unit
Control system transformer T10
The control system transformer is used to provide the voltage feed for the
circuit boards. The transformer supplies 12 V on its secondary side, and
can be adapted to suit any of four different primary voltages by moving a
strap.
The transformer should normally be connected for a primary voltage of
230 V. Switching for different power supply voltages takes place at
transformer T1.
Fig.
51
51
4746
240 V
230 V
208 V
120 V
Mechanical and electrical design