Watcher E2 Series Manual - page 13
Chose the channel that the PTZ camera is connected to and make sure the Enable check box is checked.
Set the address of the PTZ camera (usually defaults to 1). Set the Baud Rate to 2400. Set the Protocol
to PelcoP. Click the Apply button to save the changes and then Exit. Right-click on the main screen and
select P.T.Z camera option. This will bring up a PTZ control window and you should be able to control
the camera (as long as all of the wiring is correct.).
Setup User Rights
Access the Function Menu then click the Setup button. Then click on the User Management
Configuration icon.
Then click the Add button. In the General tab, input the username, password, and user type. You can
also delete users and change passwords for users from this User Management interface.
Then, in the Authority tab, you can select/deselect different functions that the user can access.
Watcherproducts.com ♦ Watcher Products ♦ 877-289-2824 13