Watcher E2 Series Manual - page 7
Device Name: The name of the device as it will appear on the client end or CMS, this would help to
recognize the device remotely.
Device ID: Do Not Change
Video Format: Always set to NTSC.
Password Check: If this option is enabled, you would need to input the user name and password for
any operation.
Show Time: If selected, the current time will be displayed during live monitoring.
Show wizard: Do Not Change.
VGA Resolution: The resolution of the live display interface, range from: VGA 800*600, VGA
1024*768, VGA 1280*1024 and CVBS. Switching between VGA and CVBS will change the menu
output mode. Please connect the relevant monitor.
Logout After (Minutes): You can setup the screen to logout after a certain amount of time (30s, 60s,
180s, & 300s). When the time passes the system will auto log you out and you will need to log back in
again.
No Image When Logout: If this item is selected, there will be no image showing when the system is
logged out.
Click the Apply button to save your changes.
Watcherproducts.com ♦ Watcher Products ♦ 877-289-2824 7