Watchguard SOHO User Manual - page 18
18
WatchGuard® SOHO Remote Management User Guide
The Log Viewer
The Log Viewer displays the communications log, a diagnostic tool
that lists the negotiations that occur during the SOHO Remote
Management (MUVPN) client connection.
From the Windows desktop system tray:
1
Right-click on the Mobile User VPN client icon.
2
Select Log Viewer.
The Log Viewer window appears.
The Connection Monitor
The Connection Monitor displays statistical and diagnostic
information for each active connection in the security policy. This
module shows the actual security policy settings and the security
association (SA) information established during Phase 1 IKE
negotiations and Phase 2 IPSec negotiations.
From the Windows desktop system tray:
1
Right-click on the Mobile User VPN client icon.
2
Select Connection Monitor.
The Connection Monitor window appears.
An icon displays to the left of the connection name:
• SA indicates that the connection has only a Phase 1 IKE SA. This
occurs when connecting to a secure gateway or when a Phase 2
IPSec SA fails to establish or has not been established yet.
• A key indicates that the connection has a Phase 2 IPSec SA, or
both a Phase 1 and Phase 2 SA.
• A key with a black line moving below it indicates that the client
is processing secure IP traffic for that connection.
• When there is a single Phase 1 SA to a gateway that is protecting
multiple Phase 2 SAs, there will be a single Phase 1 connection
with the SA icon and individual Phase 2 connections with the
key icon displayed above that entry.