Watchguard SOHO User Manual - page 8
8
WatchGuard® SOHO Remote Management User Guide
4
Double click the Services network component.
The Select Network Service window appears.
5
Select the File and Printer Sharing for Microsoft Networks Network
Service and then click the OK button.
Installing the Client for Microsoft Networks Network Client
From the Windows desktop:
1
Select Start => Settings => Network and Dial-up Connections, then
select the Dial-up connection you use to access the Internet.
The connection window appears.
2
Click on the Properties button.
3
Select the Networking tab and then click the Install button.
The Select Network Component Type window appears.
4
Double click the Client network component.
The Select Network Protocol window appears.
5
Select the Client for Microsoft Networks Network Client and then
click the OK button.
6
Click the Cancel button to close the Select Network Component Type
window.
7
Click the OK button to preserve the installed components.
8
Click the Cancel button to close the Dial-up connection window.
Install the SOHO Remote Management Client
Install the SOHO Remote Management client (which is labeled as a
Mobile User VPN, or MUVPN client) software on each remote
management computer. The software installation packages are
available from the LiveSecurity Service Web site:
http://www.watchguard.com/support
The installation process consists of two steps: installing the software
and setting up the client.